MAX2H Balancer

Balance motorcycle front and rear wheels yourself with the max2h balancer. With axle adapters also suitable for motorcycles with a single-sided swing arm.

€50.95*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Product number: MX003P0100

Why do I need a tire balancer?

You should always balance your tires when changing them - this is the only way to ensure that everything runs smoothly. If you want to do the whole thing at home, you can't do without a motorcycle balancer. With the high-quality balancing stand from max2h, you can easily balance your tires statically at home. The motorcycle tire balancer is capable of balancing all common motorcycle tires.

The highlights of the motorcycle tire balancer at a glance:

Very stable balancing stand
Simple assembly of the balancing stand
Thanks to the integrated 2-way spirit level, you can perfectly align the balancing stand
Simple and quick balancing possible at home
The maximum space between the cones (maximum tire width) is 200 mm
High-quality processed and galvanized steel
The max2h balancing stand is also available together with our EVOX tire changer & EVO2 tire changer in a set, so that you have everything you need to change tires yourself at home!

Brand:	max2h.com
Area of application:	Motorcycle
Maximum tire width:	200 mm
Shaft diameter:	16 mm
Diameter cones:	16-29 mm
Length x width x height:	44 x 22 x 10 cm
Weight:	5,3 kg
Material:	Galvanized steel

Instruction manual - Balancing stand - max2h.com

1x balancing jack base plate
2x balancing jack arms
4x rotating feet
1x Cross spirit level
1x shaft 16 mm
2x cones (16-29 mm)

Bitte lies die Montageanleitung und die Sicherheits-/Warnhinweise vor der ersten Nutzung sorgfältig durch und stelle sicher, dass du alles verstanden hast.

Die KDH GmbH (max2h) übernimmt keine Haftung für Schäden an Sachen oder Personen, die durch eine unsachgemäße oder fehlerhafte Montage bzw. Nutzung entstehen.

Sicherheits- und Warnhinweise Wuchtbock

Sicherheits- und Produktressourcen

Zubehör

MAX2H Steel Adhesive Weights Black 5x 60 g

Adhesive weights for balancingTires and wheels don't always have the same weight distribution all around. To ensure your steering wheel doesn't wobble or shake while driving, you need adhesive weights to eliminate this imbalance, allowing the wheels to run smoothly and steadily.What do I need for balancing?For home use, a static balancer is suitable. It's relatively inexpensive and gets the job done just as well as a large balancing machine in a workshop. With static balancing, the wheel is clamped onto a shaft using two cones, which is then placed on two arms supported by bearings. You can easily move the wheel by hand. If the wheel remains still in every position you stop it, then there is no imbalance. However, if the wheel continues moving in certain spots, you need to take action. The heavier part of your wheel is always at the bottom, so you need to attach adhesive weights at the top to balance it.This process is relatively simple: just remove a 5 gram piece from the 12-piece strip and stick it to the inner side of the rim. Repeat the process again. If the wheel still doesn't remain stationary in every position, then add more adhesive weights.

Available, delivery time: 1-3 days

€6.45*

MAX2H Steel Adhesive Weights Silver 5x 60 g

Adhesive weights for balancingTires and wheels don't have the same weight distribution all around. To ensure your steering wheel doesn't wobble or shake while driving, you need adhesive weights to eliminate this imbalance, allowing the wheels to run smoothly and steadily.What do I need for balancing?For home use, a static balancer is suitable. This is relatively inexpensive and does the job just as well as a large balancing machine in a workshop. In static balancing, the wheel is clamped onto a shaft using two cones, which is then placed on two arms supported by bearings. You can now easily move the wheel by hand. If the wheel remains still in every position you stop it, then there is no imbalance. However, if the wheel continues moving in certain spots, you need to take action. The heavier part of your wheel is always at the bottom, so you need to attach adhesive weights at the top to balance it.This is relatively simple: just remove a 5 gram piece from the 12-piece strip and stick it to the inner side of the rim. Repeat the process again. If the wheel still doesn't remain stationary in every position, then add more adhesive weights.

Available, delivery time: 1-3 days

€6.45*

MAX2H Balancing Shaft 12 mm - Plastic Cones

Balancing Shaft with 12 mm Diameter for BalancingMost balancing shafts are standardly thicker to provide significant benefits for many motorcycles. However, many scooter axles are unfortunately thinner. This is where the 12 mm balancing shaft comes in handy. With two cones, the wheel can be clamped and statically balanced just like with the standard shaft.

Available, delivery time: 1-3 days

€22.95*

MAX2H Balancing Shaft 20 mm

Balancer shaft with 20 mm diameter for balancingMost balancer shafts are thinner as standard in order to create a large benefit for many motorcycles. However, some axles are much wider, which is where the 20 mm balancer shaft comes into play.With two cones, the wheel can be clamped and statically balanced in the same way as with the standard shaft.

Available, delivery time: 1-3 days

€23.95*

MAX2H Rear Wheel Nut 60 mm for KTM 1290 Super Duke - 1/2 inch

Nut for loosening the rear wheel axle nut for KTM 1290 Super DukeThe tire is down, the wheel has to come off. Now what? With this socket you can easily loosen the axle nut. With the 1/2 inch socket, you can attach the nut with a regular screwdriver or torque wrench and loosen the nut. The nut is also suitable for fitting the axle nut. The rear wheel nut fits perfectly and can be used universally for all 1290 models. Your advantages at a glance:For all 1290 modelsIncludes guide, no slippingFits perfectlyUniversal 1/2 inch mount

Available, delivery time: 1-3 days

€31.95*

MAX2H Axle Adapter for KTM 1290 Super Duke and MV Agusta Brutale

Axle and balance adapter for KTM 1290 Super Duke and MV Agusta BrutaleThe tire is worn out, a new one is needed. First the tire has to be changed. If you are self-made and use a tire changer from max2h, you need this adapter. It is not only intended for changing tires, but also for balancing. When changing the tire, the rim can be fixed to the tire changer using the aluminium cone supplied. The stepped cone supplied with the tire changer is too small for single-arm swing arms. After the tire has been changed, the wheel must be balanced. The axle adapter is suitable for the max2h balancer. The wheel is clamped on the 20 mm using the two aluminum cones. The cones are fixed in place using the grub screws so that the wheel can be balanced properly.

Available, delivery time: 1-3 days

€65.95*

MAX2H 2x 20 mm Balancing Cones / Centering Cones

20 mm Balancing Cones / Centering ConesCones for balancing and centering rims.Cones compatible with the max2h Balancer Stand.Inner diameter 20 mm. Outer diameter of the cones is 22-36 mm. Used, for example, for balancing the front wheel of the KTM 1290 Super Duke.

Available, delivery time: 1-3 days

€12.75*

MAX2H Adhesive Weight Remover

Adhesive Weight Spatula for Removing Adhesive Weights and ResiduesSimple and effortless removal of adhesive weights and residues from the rim. The rim is not scratched as the spatula is made of plastic. The adhesive weight remover is robust and highly durable, with a length of 26 cm and a blade width of 2.7 cm.

Available, delivery time: 1-3 days

€8.95*

MAX2H Black Steel Adhesive Weights - 100 Strips

Adhesive weights for balancingTires and wheels don't have the same weight distribution all around. To prevent your steering wheel from wobbling or shaking while driving, you need adhesive weights to eliminate this imbalance, ensuring the wheels run smoothly and steadily.What do I need for balancing?For home use, a static balancer is suitable, which is quite affordable and gets the job done just as well as a large balancing machine in a workshop. With static balancing, the wheel is clamped onto a shaft using two cones, which is then placed on two arms supported by bearings. You can easily move the wheel by hand. If the wheel remains still in every position you stop it, then there is no imbalance. However, if the wheel continues moving in certain spots, you need to take action. The heavier part of your wheel is always at the bottom, so you need to attach adhesive weights at the top to balance it.This process is relatively simple: just remove a 5 gram piece from the 12-piece strip and stick it to the inner side of the rim. Repeat the process again. If the wheel still doesn't remain stationary in every position, then add more adhesive weights.

Available, delivery time: 1-3 days

€21.95*

MAX2H Steel Adhesive Weights Silver - 100 Strips

Adhesive weights for balancingTires and wheels don't have the same weight distribution all around. To ensure your steering wheel doesn't wobble or shake while driving, you need adhesive weights to eliminate this imbalance, allowing the wheels to run smoothly and steadily.What do I need for balancing? For home use, a static balancer is suitable. This is relatively inexpensive and does the job just as well as a large balancing machine in a workshop. In static balancing, the wheel is clamped onto a shaft using two cones, which is then placed on two arms supported by bearings. You can now easily move the wheel by hand. If the wheel remains still in every position you stop it, then there is no imbalance. However, if the wheel continues moving in certain spots, you need to take action. The heavier part of your wheel is always at the bottom, so you need to attach adhesive weights at the top to balance it. This is relatively simple: just remove a 5 gram piece from the 12-piece strip and stick it to the inner side of the rim. Repeat the process again. If the wheel still doesn't remain stationary in every position, then add more adhesive weights.

Available, delivery time: 1-3 days

€21.95*

MAX2H Axle Adapter for Ducati and Triumph single-sided swing arms

Axle and balance adapter for Ducati and Triumph motorcycles with single-sided swingarmThe tire is down, a new one is needed. First the tire has to be changed. If you are self-made and use a tire changer from max2h, you need this adapter. It is not only intended for changing tires, but also for balancing. When changing the tire, the rim can be fixed to the tire changer using the aluminium cone supplied. The stepped cone supplied with the tire changer is too small for single-arm swing arms.After the tire has been changed, the wheel must be balanced. The axle adapter is suitable for the max2h balancer. The wheel is clamped onto the 20 mm shaft using the two aluminum cones. The cones are fixed in place using the grub screws so that the wheel can be balanced properly.

Available, delivery time: 1-3 days

€60.95*

MAX2H Axle Adapter for BMW 5-Hole Rims

Axle and balancing adapter for BMW motorcycles with 5-hole rims.The tire is worn out, a new one is needed. First, the tire needs to be changed. For those who are DIY enthusiasts and use a tire mounting device from max2h, this adapter is required. It's not only for tire changing but also for balancing. When changing the tire, the rim can be bolted with the 5-hole adapter. This ensures that it's securely and cleanly fixed on the 20 mm shaft of the tire mounting device.After the tire has been changed, the wheel needs to be balanced. The axle adapter fits the max2h balancing stand. Just like when changing the tire, the rim is bolted with the 5-hole adapter and then fixed on the balancing shaft to perform static balancing.

Available, delivery time: 1-3 days

€55.95*

MAX2H Axle Adapter for BMW 3- and 4-Hole Rims

Axle and balancing adapter for BMW motorcycles with 3- or 4-hole rims.The tire is worn out, a new one is needed. First, the tire needs to be changed. For those who are DIY enthusiasts and use a tire mounting device from MAX2H, this adapter is required. It's not only for tire changing but also for balancing. When changing the tire, the rim can be bolted with the adapter. This ensures that it's securely and cleanly fixed on the 20 mm shaft of the tire mounting device.After the tire has been changed, the wheel needs to be balanced. The axle adapter fits the MAX2H balancing stand. Just like when changing the tire, the rim is bolted with the adapter and then fixed on the balancing shaft to perform static balancing.

Available, delivery time: 1-3 days

€45.95*

MAX2H Axle Adapter for Honda CB1000R SC60

Axle and balancing adapter for Honda CB1000R SC60 up to 2017.The tire is worn out, a new one is needed. First, the tire needs to be changed. For those who are DIY enthusiasts and use a tire mounting device from MAX2H, this adapter is required. It's not only for tire changing but also for balancing. When changing the tire, the axle adapter is inserted into the negative of the rim. This ensures that it's securely and cleanly fixed on the 20 mm shaft of the tire mounting device.After the tire has been changed, the wheel needs to be balanced. The axle adapter fits the MAX2H balancing stand. Just like when changing the tire, the adapter is inserted into the rim and then fixed on the balancing shaft to perform static balancing.

Available, delivery time: 1-3 days

€40.95*

MAX2H Axle Adapter for Kawasaki H2 SX

Axle and balancing adapter for Kawasaki H2 SX models.The tire is worn out, a new one is needed. First, the tire needs to be changed. For those who are DIY enthusiasts and use a max2h tire mounting device, this adapter is necessary. It's not just for tire changing but also for balancing. When changing the tire, the wheel can be bolted to the adapter, ensuring it is clean and stable on the 20mm shaft of the tire mounting device.After the tire has been changed, the wheel needs to be balanced. The axle adapter fits with the max2h balancing stand. Just like when changing the tire, the wheel is bolted to the adapter and then fixed on the balancing shaft for static balancing.

Available, delivery time: 1-3 days

€50.95*

MAX2H Axle Adapter for Honda VFR 800

MAX2H axle and balancing adapter for Honda VFR 800The tire is worn out, a new one is needed. First, the tire needs to be changed. For those who are self-reliant and use a MAX2H tire mounting device, this adapter is required. It's not only for tire changing but also for balancing. When changing the tire, the axle adapter is inserted into the negative of the rim. This ensures that it is clean and stable on the 20 mm shaft of the tire mounting device.After the tire has been changed, the wheel needs to be balanced. The axle adapter fits the MAX2H balancing stand. Just like when changing the tire, the adapter is inserted into the rim and then fixed on the balancing shaft for static balancing.

Available, delivery time: 1-3 days

€43.49*

MAX2H Socket for Ducati Front and Rear Axle Nuts - 1/2 inch

Socket for loosening the front and rear axle nuts of Ducati motorcycles with a single-sided swingarm.The tire is worn out, the wheel needs to come off. What now? With this socket, you can easily loosen the axle nuts of your motorcycle. With the 1/2 inch socket drive, you can attach the socket with a regular wrench or torque wrench and loosen the nut. The rear wheel nut fits precisely and is universally usable for all Ducati models with a single-sided swingarm. Your advantages at a glance: Includes a guide, no slipping Fits precisely Universal 1/2 inch drive

Available, delivery time: 1-3 days

€36.95*

MAX2H Axle Adapter for Honda VFR 750 RC36

Axle and balancing adapter for Honda VFR 750.The tire is worn out, a new one is needed. First, the tire needs to be changed. For those who are DIY enthusiasts and use a tire mounting device from MAX2H, this adapter is required. It's not only for tire changing but also for balancing. When changing the tire, the axle adapter is inserted into the negative of the rim. This ensures that it's securely and cleanly fixed on the 20 mm shaft of the tire mounting device.After the tire has been changed, the wheel needs to be balanced. The axle adapter fits the MAX2H balancing stand. Just like when changing the tire, the adapter is inserted into the rim and then fixed on the balancing shaft to perform static balancing.

Available, delivery time: 1-3 days

€39.95*

MAX2H Axle Adapter for MV Agusta MF4

Axle and balancing adapter for MV Agusta MF4.The tire is worn out, a new one is needed. First, the tire needs to be changed. For those who are DIY enthusiasts and use a tire mounting device from MAX2H, this adapter is required. It's not only for tire changing but also for balancing. When changing the tire, the axle adapter is inserted into the negative of the rim. This ensures that it's securely and cleanly fixed on the 20 mm shaft of the tire mounting device.After the tire has been changed, the wheel needs to be balanced. The axle adapter fits the MAX2H balancing stand. Just like when changing the tire, the adapter is inserted into the rim and then fixed on the balancing shaft to perform static balancing.

Available, delivery time: 1-3 days

€39.95*